Insights ~6 minute read

Loan-to-Value Calibration in Stock Loans.

Loan-to-value (LTV) on a stock loan is calculated for each position, not taken from a published rate sheet. Six variables drive it: free float, average daily trading volume, volatility, sector and issuer factors, shareholder concentration, and the loan’s structure (recourse, tenor, custody, currency). A specific LTV comes with indicative terms, typically within one to two business days of submission.

A helicoidal stone staircase curving between paired columns

On an institutional stock loan, loan-to-value is a calculated output rather than a published rate. Six variables drive it, each affecting the lender’s effective recovery in a stress scenario, so the same notional position can support materially different LTVs.

Borrowers usually open with some version of “What LTV can I get on this position?” and the firm usually replies with some version of “Tell me about the position”. The exchange is not evasive: LTV is calculated from the position, not published in advance.

Two of the variables concern the underlying itself, two the position within the underlying, and two the structure of the transaction. Together they produce a calibrated LTV that may differ materially from the LTV on a position that looked superficially similar.

1. How does free float affect loan-to-value?

Free float is the proportion of an issuer’s shares not held by insiders, controlling shareholders, or other long-term restricted holders. It sets the practical depth of the market the lender would liquidate into. An issuer with 70% free float has a deeper market than the same notional issuer with 30%, even if daily trading volumes look comparable in absolute terms.

For pledges of substantial holdings, the float consideration sharpens further, particularly where the pledged position is itself a meaningful percentage of the free float. Liquidating a pledge that represents 5% of an issuer’s free float is a materially different exercise from liquidating one that represents 0.5%. The LTV is adjusted accordingly.

2. How does average daily trading volume affect LTV?

Average daily volume (ADV) is the most direct measure of the time needed to liquidate a pledged position without disproportionate market impact. A pledge representing thirty days of ADV can be liquidated cleanly in five to ten trading days; a pledge representing six months of ADV cannot.

The lender’s effective recovery in a stress scenario depends on this days-of-ADV measure, and LTV is calibrated against it. The conventional institutional benchmark is that a pledge representing more than ten percent of ADV per day in a stress liquidation produces material market impact.

Where the pledge size implies a long liquidation period, the LTV is haircut to give the lender adequate cushion across that period.

3. How do implied and realised volatility affect LTV?

A high-volatility underlying requires a larger LTV haircut than a low-volatility one. The reason is direct: the lender’s collateral cushion must absorb a price move during the margin-call response window without breaching the loan-to-value condition. An underlying with 50% annualised volatility can move 8–10% in a single trading day on a routine basis; an underlying with 15% volatility cannot.

Volatility is one of the principal drivers of LTV differences between large-cap utilities and growth-stage technology issuers. The same applies between developed-market and emerging-market indices, and between mature businesses and recently listed issuers. Two positions of the same notional size in different sectors can support materially different LTVs because of volatility alone.

4. Which sector and issuer factors affect LTV?

Beyond volatility, certain sectors carry structural characteristics that affect LTV: extractive industries with commodity-price exposure, biotechnology issuers with binary regulatory outcomes, and financial institutions with capital-cycle sensitivity. The same applies to recently listed issuers with limited trading history and to issuers under regulatory investigation. Each of these is a layer on the calibration, sometimes additive, sometimes overriding.

Issuer-specific factors are also material: pending litigation, regulatory inquiries, going-concern qualifications in audit reports, takeover speculation, and any other factor that materially affects the predictability of the underlying’s near-term path. The structuring stage maps these explicitly.

5. How does shareholder concentration affect LTV?

Concentration on the share register affects LTV through several channels. A highly concentrated register implies the free float is small relative to nominal market capitalisation, narrowing the depth of the practical market. It also implies that any single substantial-holder disclosure event (a sale, a pledge, an inheritance) has outsized market impact, which sharpens the lender’s risk in a liquidation scenario.

The borrower’s own status on the register also matters. A controlling shareholder’s pledge in a family-listed company is calibrated differently from a pledge of the same notional amount by a passive institutional investor in the same issuer. The reason is structural: the controlling shareholder’s pledge is a more market-significant event, and the lender’s effective liquidation path is materially different.

6. How do recourse, tenor, custody and currency move the LTV?

The first five variables are about the position and the underlying. The sixth is about the transaction itself: the recourse profile, the tenor, the custody arrangement, and any cross-currency element. Each of these moves the LTV.

  • ·
    Recourse. Non-recourse structures run at lower LTV than full-recourse on the same underlying, because the lender absorbs the tail risk. See how non-recourse and full-recourse loans compare.
  • ·
    Tenor. Longer tenors run at lower LTV than shorter tenors on the same underlying, because the lender’s stress window is longer.
  • ·
    Custody. Bankruptcy-remote custody arrangements support higher LTV than non-bankruptcy-remote structures, because the lender’s recovery path in a stress scenario is more predictable.
  • ·
    Cross-currency. Cross-currency structures run with an FX haircut against same-currency structures. See how cross-currency stock loans are structured.

Why is there no published LTV rate sheet?

Six variables on the position side and three or four on the structure side produce a calibration space that cannot be reduced to a rate sheet. The firm does not publish one, for two reasons.

First, any published number would be either so wide that it conveys no information, or so specific that it misleads borrowers whose positions sit elsewhere in the calibration space. Second, the calibration is the value the firm adds, and reducing it to a rate sheet would convey the wrong impression of what the structuring stage actually does.

For an individual position, the calibration is conducted at the indicative-terms stage, typically within one to two business days of an initial submission. It produces a specific LTV against specified structural terms. That number is meaningful because it is calibrated to the specific position; a generic published number would not be.

See how these variables move the range with the illustrative LTV calculator.

Indicative LTV Calculator

The calculator is illustrative and indicative only (not an offer, quote, or advice). It applies the drivers above to place an approximate range, never a precise figure.

At a glance
LTV Drivers Compared

The variables, and the direction each moves LTV.

The variables that drive loan-to-value on an institutional stock loan (free float, average daily volume, volatility, sector and issuer factors, shareholder concentration, and the structural terms) and the direction each pushes the calibration. No figure or band is published, because the ratio is a property of the collateral rather than of the product.
Variable Pushes LTV higher when... Pushes LTV lower when...
Free float The float is large and the market deep, and the pledge is a small fraction of it. The float is thin, or the pledge represents a meaningful percentage of it.
Average daily trading volume The position clears cleanly within a few days of ADV. The position represents many days, or months, of ADV, lengthening the liquidation window.
Implied and realised volatility The underlying is low-volatility, so a smaller collateral cushion suffices. The underlying is high-volatility and can move sharply within the margin-call response window.
Sector and issuer-specific factors The issuer is a mature, stable business with a clean disclosure record. Sector or issuer factors add risk: commodity exposure, binary regulatory outcomes, litigation, or investigation.
Shareholder concentration The register is broadly held and the borrower is a passive holder. The register is concentrated, or the borrower is a controlling shareholder whose pledge is a market-significant event.
Structural terms Full recourse, shorter tenor, bankruptcy-remote custody, and same-currency funding. Non-recourse, longer tenor, non-bankruptcy-remote custody, or a cross-currency element.

A general account of the drivers of loan-to-value, indicative and illustrative only: not a quote or a representation about any specific transaction. See the disclosures.

Guide
Start Here

Where to start: the main guide.

How the loan itself works is set out in the main guide: securities-based lending: how securities-backed loans work. Market-by-market detail covers 38 exchanges in 34 countries.

FAQ
Common Questions

Loan-to-value calibration: frequently asked questions.

Q · 01

What LTV is typical for a large-cap U.S. stock?

There is no single typical figure: the LTV is calibrated to the position, the recourse profile, the tenor, and prevailing institutional credit conditions. For a large-cap listed on NYSE or Nasdaq with high free float and high ADV, institutional stock-loan LTVs typically sit in a band wider than retail margin-loan ratios.

That band is narrower than what an aggressive borrower might hope for. Indicative ratios are issued only after position review.

Q · 02

Why is the LTV on my position lower than I expected?

A lower-than-expected LTV usually traces to one or more calibration variables, in the position or the structure. Free float may be smaller than nominal market capitalisation suggests, or the position may be large relative to ADV. The underlying may carry higher implied volatility than peers, or sector or issuer-specific factors may have been flagged at review.

The structure (tenor, recourse, currency) can also reduce the calibrated number. The structuring stage provides specific reasoning for the offered LTV.

Q · 03

Can I get a higher LTV by accepting different structural terms?

Yes, in some cases: accepting full recourse rather than non-recourse, a shorter tenor, or a same-currency rather than a cross-currency structure typically increases the calibrated LTV. Where the borrower has not pre-specified a structure, the firm’s practice is to issue indicative terms across multiple structural configurations, so the trade-offs are explicit.
Confidential Enquiries

A specific position to discuss?

Submit a confidential enquiry. A senior principal will respond within one business day.